EMPI Long Block 1914cc (98-0484-B)
EMPI Long Block Engines are hand assembled in Southern California with ALL NEW ALL EMPI matched and approved components.
No core required, no long lead times-get your Classic VW back on the road today!
Every EMPI Long Block comes with a 12 month Unlimited Miles warranty.
EMPI Long Blocks are assembled with name brand components from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT, Mahle, Manton, Silverline and Schadek
1914cc Long Blocks include:
- AutoLinea-EMPI HD aluminum cases
- EMPI High Performance cylinder heads with S/S valves, chromoly retainers and EMPI proprietary 3 angle valve job performed on a Rottler valve machine at EMPI in Anaheim, California.
- All EMPI Long Blocks are palletized, shrink-wrapped, crated and ready to ship.
- NOTE: Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in Sand Seal Pulley Kit.
EMPI PART NUMBER 98-0484-B:
- ENGINE CASE- AutoLinea-EMPI. H.D. “Bubble Top” Engine Case
- CRANKSHAFT- Direct Drilled, 69mm Stroke
- RODS- OE Specification
- CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
- LIFTERS- Precision Ground and Heat Treated, 28mm
- FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm
- GLAND NUT- Chromoly, Heavy Duty
- MAIN BEARINGS- Standard, Steel Center
- ROD BEARINGS- Standard
- CAM BEARINGS- Standard Thrust
- OIL PUMP- Schadek, 26mm with Cover
- HEAD STUDS- Chromoly, 8mm with Nuts
- PISTONS & CYLINDERS- OE Specification, 94mm Diameter, 7.7:1 Compression Ratio
- PUSHROD TUBES- Stock Style
- HEADS- EMPI High-Performance Dual Port Cylinder Head, 94mm Bore, 35.5 Intake x 32mm Exhaust S/S Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
- PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035" Wall thickness
- ROCKERS- High Performance, Stock 1.1:1 Ratio
- VALVE COVER- Stock Steel Style, Black
- GASKETS- Elring Engine Gasket Set
*Pictures shown are for illustration purposes only
*Available shipping in the lower 48 states.
The engine drop ships from EMPI at a cost of $385
EMPI Long Block 1914cc (98-0484-B)
EMPI Long Block Engines are hand assembled in Southern California with ALL NEW ALL EMPI matched and approved components.
No core required, no long lead times-get your Classic VW back on the road today!
Every EMPI Long Block comes with a 12 month Unlimited Miles warranty.
EMPI Long Blocks are assembled with name brand components from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT, Mahle, Manton, Silverline and Schadek
1914cc Long Blocks include:
- AutoLinea-EMPI HD aluminum cases
- EMPI High Performance cylinder heads with S/S valves, chromoly retainers and EMPI proprietary 3 angle valve job performed on a Rottler valve machine at EMPI in Anaheim, California.
- All EMPI Long Blocks are palletized, shrink-wrapped, crated and ready to ship.
- NOTE: Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in Sand Seal Pulley Kit.
EMPI PART NUMBER 98-0484-B:
- ENGINE CASE- AutoLinea-EMPI. H.D. “Bubble Top” Engine Case
- CRANKSHAFT- Direct Drilled, 69mm Stroke
- RODS- OE Specification
- CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
- LIFTERS- Precision Ground and Heat Treated, 28mm
- FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm
- GLAND NUT- Chromoly, Heavy Duty
- MAIN BEARINGS- Standard, Steel Center
- ROD BEARINGS- Standard
- CAM BEARINGS- Standard Thrust
- OIL PUMP- Schadek, 26mm with Cover
- HEAD STUDS- Chromoly, 8mm with Nuts
- PISTONS & CYLINDERS- OE Specification, 94mm Diameter, 7.7:1 Compression Ratio
- PUSHROD TUBES- Stock Style
- HEADS- EMPI High-Performance Dual Port Cylinder Head, 94mm Bore, 35.5 Intake x 32mm Exhaust S/S Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
- PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035" Wall thickness
- ROCKERS- High Performance, Stock 1.1:1 Ratio
- VALVE COVER- Stock Steel Style, Black
- GASKETS- Elring Engine Gasket Set
*Pictures shown are for illustration purposes only
*Available shipping in the lower 48 states.
The engine drop ships from EMPI at a cost of $385
