EMPI Stock Long Block 1600cc
EMPI Long Block Engines are hand assembled in Southern California with ALL NEW ALL EMPI matched and approved components.
No core required, no long lead times-get your Classic VW back on the road today!
Every EMPI Long Block comes with a 12 month Unlimited Miles warranty.
EMPI Long Blocks are assembled with name brand components from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT, Mahle, Manton, Silverline and Schadek
1600cc Long Blocks include:
- AutoLinea aluminum cases and AutoLinea dual port cylinder heads with OE style OSVAT valves, seats and EMPI proprietary 3 angle valve job performed on a Rottler valve machine at EMPI in Anaheim, California.
- All EMPI Long Blocks are palletized, shrink-wrapped, crated and ready to ship.
- NOTE: Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in Sand Seal Pulley Kit.
EMPI PART NUMBER- 98-0480-B:
- ENGINE CASE- AutoLinea, Standard, Stock Aluminum Engine Case
- CRANKSHAFT- Direct Drilled, 69mm Stroke RODS- OE Specification
- CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
- LIFTERS- Precision Ground and Heat Treated, 28mm
- FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm
- GLAND NUT- Chromoly, Heavy Duty
- MAIN BEARINGS- Standard, Steel Center
- ROD BEARINGS- Standard
- CAM BEARINGS- Standard Thrust
- OIL PUMP- Schadek, 26mm with Cover
- HEAD STUDS- Chromoly, 8mm with Nuts
- PISTONS & CYLINDERS- Mahle, 85.5mm Diameter, 7.0:1 Compression Ratio
- PUSHROD TUBES- Stock Style
- HEADS- AutoLinea Dual Port Cylinder Head, EMPI Spec, Includes: OSVAT O.E. Style 35.55mm Intake and 32mm Exhaust Valves, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
- PUSHRODS- Stock Length, Fully Assembled Hi-Performance Push Rods, 1.45mm (0.057") Wall Thickness
- ROCKERS- High Performance, Stock 1.1:1 Ratio
- VALVE COVER- Stock Steel Style, Black
- GASKETS- Elring Engine Gasket Set
*Pictures shown are for illustration purposes only
*Special Freight policies apply.
EMPI Stock Long Block 1600cc
EMPI Long Block Engines are hand assembled in Southern California with ALL NEW ALL EMPI matched and approved components.
No core required, no long lead times-get your Classic VW back on the road today!
Every EMPI Long Block comes with a 12 month Unlimited Miles warranty.
EMPI Long Blocks are assembled with name brand components from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT, Mahle, Manton, Silverline and Schadek
1600cc Long Blocks include:
- AutoLinea aluminum cases and AutoLinea dual port cylinder heads with OE style OSVAT valves, seats and EMPI proprietary 3 angle valve job performed on a Rottler valve machine at EMPI in Anaheim, California.
- All EMPI Long Blocks are palletized, shrink-wrapped, crated and ready to ship.
- NOTE: Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in Sand Seal Pulley Kit.
EMPI PART NUMBER- 98-0480-B:
- ENGINE CASE- AutoLinea, Standard, Stock Aluminum Engine Case
- CRANKSHAFT- Direct Drilled, 69mm Stroke RODS- OE Specification
- CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
- LIFTERS- Precision Ground and Heat Treated, 28mm
- FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm
- GLAND NUT- Chromoly, Heavy Duty
- MAIN BEARINGS- Standard, Steel Center
- ROD BEARINGS- Standard
- CAM BEARINGS- Standard Thrust
- OIL PUMP- Schadek, 26mm with Cover
- HEAD STUDS- Chromoly, 8mm with Nuts
- PISTONS & CYLINDERS- Mahle, 85.5mm Diameter, 7.0:1 Compression Ratio
- PUSHROD TUBES- Stock Style
- HEADS- AutoLinea Dual Port Cylinder Head, EMPI Spec, Includes: OSVAT O.E. Style 35.55mm Intake and 32mm Exhaust Valves, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
- PUSHRODS- Stock Length, Fully Assembled Hi-Performance Push Rods, 1.45mm (0.057") Wall Thickness
- ROCKERS- High Performance, Stock 1.1:1 Ratio
- VALVE COVER- Stock Steel Style, Black
- GASKETS- Elring Engine Gasket Set
*Pictures shown are for illustration purposes only
*Special Freight policies apply.