Rear hub, 14 X 1.5 - 4130 Chromoly - 8 hole. Sold each
BILLETS ARE MACHINED EXTRA THICK, BROACHED WITH LONG SPLINES FOR SWING AXLE AND IRS APPLICATIONS
FULLY CNC MACHINED, THEN HARD ANODIZED, FOR RUST PREVENTION AND A QUALITY FINISH
· HUBS ARE BEEFY! FOR USE WITH BIG HORSEPOWER CARS OR THOSE STOCK CARS THAT ARE TIRED OF " CAST " AFTERMARKET HUBS FAILING ON THEM
THESE FEATURE TWO SETS OF 4x130 LUG HOLES:
- ONE SET STOCK THREADED 14mm X 1.5mm FOR USE WITH STOCK LUG BOLTS OR SCREW IN STUD
- THE OTHER SET ARE CUT FOR 9/16" PRESS IN STUDS FOR RACING APPLICATIONS
WE EVEN DRILLED & TAPPED THEM FOR THE DRUM SAFETY SCREWS M8x10 WHICH ASSIST TO HOLD THE DRUMS INPLACE
HUBS FIT THE REAR AXLE AND ARE FOR USE WITH TYPE 3 4 LUG BRAKE DRUMS, BACKING PLATES AND BRAKE HARDWARE
SOLVING REAR HUB PROBLEMS THE STOCK ONES HAVE, DUE TO AGE, QUALITY OR APPLICATION
Fits the following model years:
- 1966-1973 Type 3 Notchback
- 1966-1973 Type 3 Squareback
- 1966-1973 Type 3 Fastback
- 1966-1969 Type 34 Razor
Rear hub, 14 X 1.5 - 4130 Chromoly - 8 hole. Sold each
BILLETS ARE MACHINED EXTRA THICK, BROACHED WITH LONG SPLINES FOR SWING AXLE AND IRS APPLICATIONS
FULLY CNC MACHINED, THEN HARD ANODIZED, FOR RUST PREVENTION AND A QUALITY FINISH
· HUBS ARE BEEFY! FOR USE WITH BIG HORSEPOWER CARS OR THOSE STOCK CARS THAT ARE TIRED OF " CAST " AFTERMARKET HUBS FAILING ON THEM
THESE FEATURE TWO SETS OF 4x130 LUG HOLES:
- ONE SET STOCK THREADED 14mm X 1.5mm FOR USE WITH STOCK LUG BOLTS OR SCREW IN STUD
- THE OTHER SET ARE CUT FOR 9/16" PRESS IN STUDS FOR RACING APPLICATIONS
WE EVEN DRILLED & TAPPED THEM FOR THE DRUM SAFETY SCREWS M8x10 WHICH ASSIST TO HOLD THE DRUMS INPLACE
HUBS FIT THE REAR AXLE AND ARE FOR USE WITH TYPE 3 4 LUG BRAKE DRUMS, BACKING PLATES AND BRAKE HARDWARE
SOLVING REAR HUB PROBLEMS THE STOCK ONES HAVE, DUE TO AGE, QUALITY OR APPLICATION
Fits the following model years:
- 1966-1973 Type 3 Notchback
- 1966-1973 Type 3 Squareback
- 1966-1973 Type 3 Fastback
- 1966-1969 Type 34 Razor
