EMPI Long Block 1776cc
EMPI Long Block Engines are hand assembled in Southern California with ALL NEW ALL EMPI matched and approved components.
No core required, no long lead times-get your Classic VW back on the road today!
Every EMPI Long Block comes with a 12 month Unlimited Miles warranty.
EMPI Long Blocks are assembled with name brand components from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT, Mahle, Manton, Silverline and Schadek
1776cc Long Blocks Include New:
- AutoLinea-EMPI HD aluminum cases
- EMPI High Performance cylinder heads with S/S valves, chromoly retainers and EMPI proprietary 3 angle valve job performed on a Rottler valve machine at EMPI in Anaheim, California.
- All EMPI Long Blocks are palletized, shrink-wrapped, crated and ready to ship.
NOTE: Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in Sand Seal Pulley Kit.
EMPI PART NUMBER- 98-0482-B
- ENGINE CASE AutoLinea-EMPI, H.D. “Bubble Top” Engine Case
- CRANKSHAFT- Direct Drilled, 69mm Stroke RODS- OE Specification
- CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
- LIFTERS- Precision Ground and Heat Treated, 28mm
- FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm
- GLAND NUT- Chromoly, Heavy Duty
- MAIN BEARINGS- Standard, Steel Center
- ROD BEARINGS- Standard
- CAM BEARINGS- Standard Thrust
- OIL PUMP- Schadek, 26mm with Cover
- HEAD STUDS- Chromoly, 8mm with Nuts
- PISTONS & CYLINDERS- OE Specification, 90.5mm Bore, 7.2:1 Compression Ratio
- PUSHROD TUBES- Stock Style
- HEADS- EMPI High Performance Dual Port Cylinder Head, 90.5 / 92mm Bore, 35.5 Intake x 32mm Exhaust S/S Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
- PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035" Wall Thickness
- ROCKERS- High Performance, Stock 1.1:1 Ratio
- VALVE COVER- Stock Steel Style, Black
- GASKETS- Elring Engine Gasket Set
*Pictures shown are for illustration purposes only
*Special Freight policies apply.
EMPI Long Block 1776cc
EMPI Long Block Engines are hand assembled in Southern California with ALL NEW ALL EMPI matched and approved components.
No core required, no long lead times-get your Classic VW back on the road today!
Every EMPI Long Block comes with a 12 month Unlimited Miles warranty.
EMPI Long Blocks are assembled with name brand components from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT, Mahle, Manton, Silverline and Schadek
1776cc Long Blocks Include New:
- AutoLinea-EMPI HD aluminum cases
- EMPI High Performance cylinder heads with S/S valves, chromoly retainers and EMPI proprietary 3 angle valve job performed on a Rottler valve machine at EMPI in Anaheim, California.
- All EMPI Long Blocks are palletized, shrink-wrapped, crated and ready to ship.
NOTE: Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in Sand Seal Pulley Kit.
EMPI PART NUMBER- 98-0482-B
- ENGINE CASE AutoLinea-EMPI, H.D. “Bubble Top” Engine Case
- CRANKSHAFT- Direct Drilled, 69mm Stroke RODS- OE Specification
- CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
- LIFTERS- Precision Ground and Heat Treated, 28mm
- FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm
- GLAND NUT- Chromoly, Heavy Duty
- MAIN BEARINGS- Standard, Steel Center
- ROD BEARINGS- Standard
- CAM BEARINGS- Standard Thrust
- OIL PUMP- Schadek, 26mm with Cover
- HEAD STUDS- Chromoly, 8mm with Nuts
- PISTONS & CYLINDERS- OE Specification, 90.5mm Bore, 7.2:1 Compression Ratio
- PUSHROD TUBES- Stock Style
- HEADS- EMPI High Performance Dual Port Cylinder Head, 90.5 / 92mm Bore, 35.5 Intake x 32mm Exhaust S/S Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
- PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035" Wall Thickness
- ROCKERS- High Performance, Stock 1.1:1 Ratio
- VALVE COVER- Stock Steel Style, Black
- GASKETS- Elring Engine Gasket Set
*Pictures shown are for illustration purposes only
*Special Freight policies apply.
