EMPI Stock 1776cc Long Block PLUS Engine with MAG Case
EMPI Long Block Plus+ Engines are Hand Assembled in Southern California
With ALL NEW ALL EMPI Matched and Approved Components by VW Racing Legend, Jack Sacchette.
Available in Three Standard Configurations for Type 1 or 2 Applications.
No Core Required, No Long Lead Times.
Get Your Classic VW Back on the Road Today!
Assembled with Name Brand Components from AA Performance Products, AutoLinea, Elring, EMPI, Manley, Manton, Silverline and Schadek
Every EMPI Long Block comes with a 12 month Unlimited Miles warranty.
Includes:
- ENGINE CASE- AS41, Magnesium Alloy Case, Bored to 90.5mm
- CRANKSHAFT- Forged, Counter Weighted, Direct Drilled, 69mm Stroke
- RODS- OE Specification
- CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
- LIFTERS- Precision Ground and Heat Treated, 28mm
- FLYWHEEL- Lightened, 8 Dowel Pin, 200mm
- GLAND NUT- Chromoly, Heavy Duty
- MAIN BEARINGS- Standard, Steel Center
- ROD BEARINGS- Standard
- CAM BEARINGS- Standard Thrust
- OIL PUMP- Schadek, 26mm with Cover
- HEAD STUDS- Chromoly, 8mm with Nuts
- PISTONS & CYLINDERS- OE Specification, 90.5mm Bore
- PUSHROD TUBES- Stainless Steel Windage Style
- HEADS- EMPI High Performance Dual Port Cylinder Head, 90.5 / 92mm Bore, 35.5 Intake x 32mm Exhaust S/S Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
- PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035" Wall Thickness
- ROCKERS- High Performance, Stock 1.1:1 Ratio
- VALVE COVER- Stainless Steel Stock Style w/ EMPI Logo
- GASKETS- Elring Engine Gasket Set
*Pictures shown are for illustration purposes only
*Available shipping in the lower 48 states
*The engine drop ships from EMPI at a cost of $385
*All EMPI Long Blocks are palletized, shrink-wrapped, crated and ready to ship
EMPI Stock 1776cc Long Block PLUS Engine with MAG Case
EMPI Long Block Plus+ Engines are Hand Assembled in Southern California
With ALL NEW ALL EMPI Matched and Approved Components by VW Racing Legend, Jack Sacchette.
Available in Three Standard Configurations for Type 1 or 2 Applications.
No Core Required, No Long Lead Times.
Get Your Classic VW Back on the Road Today!
Assembled with Name Brand Components from AA Performance Products, AutoLinea, Elring, EMPI, Manley, Manton, Silverline and Schadek
Every EMPI Long Block comes with a 12 month Unlimited Miles warranty.
Includes:
- ENGINE CASE- AS41, Magnesium Alloy Case, Bored to 90.5mm
- CRANKSHAFT- Forged, Counter Weighted, Direct Drilled, 69mm Stroke
- RODS- OE Specification
- CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
- LIFTERS- Precision Ground and Heat Treated, 28mm
- FLYWHEEL- Lightened, 8 Dowel Pin, 200mm
- GLAND NUT- Chromoly, Heavy Duty
- MAIN BEARINGS- Standard, Steel Center
- ROD BEARINGS- Standard
- CAM BEARINGS- Standard Thrust
- OIL PUMP- Schadek, 26mm with Cover
- HEAD STUDS- Chromoly, 8mm with Nuts
- PISTONS & CYLINDERS- OE Specification, 90.5mm Bore
- PUSHROD TUBES- Stainless Steel Windage Style
- HEADS- EMPI High Performance Dual Port Cylinder Head, 90.5 / 92mm Bore, 35.5 Intake x 32mm Exhaust S/S Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
- PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035" Wall Thickness
- ROCKERS- High Performance, Stock 1.1:1 Ratio
- VALVE COVER- Stainless Steel Stock Style w/ EMPI Logo
- GASKETS- Elring Engine Gasket Set
*Pictures shown are for illustration purposes only
*Available shipping in the lower 48 states
*The engine drop ships from EMPI at a cost of $385
*All EMPI Long Blocks are palletized, shrink-wrapped, crated and ready to ship
